|
Appendix C to Part 125 - Ice Protection
If certification with ice protection provisions is desired, compliance with the following must be shown: (a) The recommended procedures for the use of the ice protection equipment must be set forth in the Airplane Flight Manual. (b) An analysis must be performed to establish, on the basis of the airplane's operational needs, the adequacy of the ice protection system for the various components of the airplane. In addition, tests of the ice protection system must be conducted to demonstrate that the airplane is capable of operating safely in continuous maximum and intermittent maximum icing conditions as described in appendix C of part 25 of this chapter. (c) Compliance with all or portions of this section may be accomplished by reference, where applicable because of similarity of the designs, to analyses and tests performed by the applicant for a type certificated model.
|