(a) General. This part prescribes certain standards and procedures which are not set forth in full text in the rule. Those standards and procedures are contained in published material which is reasonably available to the class of persons affected and has been approved for incorporation by reference by the Director of the Federal Register under 5 U.S.C. 552 (a) and 1 CFR Part 51.

(b) Incorporated matter. (1) Each publication, or part of a publication, which is referenced but not set forth in full-text in this part and which is identified in paragraph (c) of this section is hereby incorporated by reference and made a part of Part 36 of this chapter with the approval of the Director of the Federal Register.

(2) Incorporated matter which is subject to subsequent change is incorporated by reference according to the specific reference and to the identification statement. Adoption of any subsequent change in incorporated matter is made under Part 11 of this chapter and 1 CFR Part 51.

(c) Identification statement. The complete title or description which identifies each published matter incorporated by reference in this part is as follows:

(1) International Electrotechnical Commission (IEC) Publications. (i) IEC Publication No. 179, entitled "Precision Sound Level Meters," dated 1973.

(ii) IEC Publication No. 225, entitled "Octave, Half-Octave, Third Octave Band Filters Intended for the Analysis of Sounds and Vibrations," dated 1966.

(iii) IEC Publication No. 651, entitled "Sound Level Meters," first edition, dated 1979.

(iv) IEC Publication No. 561, entitled "Electro-acoustical Measuring Equipment for Aircraft Noise Certification," first edition, dated 1976.

(v) IEC Publication No. 804, entitled "Integrating-averaging Sound Level Meters," first edition, dated 1985.

(vi) IEC Publication 61094-3, entitled "Measurement Microphones -- Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique", edition 1.0, dated 1995.

(vii) IEC Publication 61094-4, entitled "Measurement Microphones -- Part 4: Specifications for Working Standard Microphones", edition 1.0, dated 1995.

(viii) IEC Publication 61260, entitled "Electroacoustics-Octave-Band and Fractional-Octave-Band filters", edition 1.0, dated 1995.

(ix) IEC Publication 61265, entitled "Instruments for Measurement of Aircraft Nose-Performance Requirements for systems measure one -- Third-Octave-Band Sound pressure Levels in Noise Certification of Transport-Category Aeroplanes," edition 1.0, dated 1995.

(x) IEC Publication 60942, entitled "Electroacoustics -- Sound Calibrators," edition 2.0, dated 1997.

(2) Society of Automotive Engineers (SAE) Publications. (i) SAE ARP 866A, entitled "Standard Values at Atmospheric Absorption as a Function of Temperature and Humidity for Use in Evaluating Aircraft Flyover Noise," dated March 15, 1975.

(d) Availability for purchase. Published material incorporated by reference in this part may be purchased at the price established by the publisher or distributor at the following mailing addresses:

(1) IEC publications.

(i) International Electrotechnical Commission, 3, rue de Varembe, Case postale 131, 1211 Geneva 20, Switzerland.

(ii) American National Standard Institute, 11 West 42nd Street, New York City, New York 10036.

(2) SAE publications. Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrentown, Pennsylvania 15096.