|  | 
     
       
         | 
       Renegrade (Murphy)
 
      
       
             
            The open cockpit biplane has a certain nostalgic eye 
            appealing quality which is reflected in the Renegade and even more 
            so in the Renegade Spirit. Pilots who have flown biplanes regard 
            them highly for their outstanding performance and handling 
            characteristics. Those same qualities have also been incorporated 
            into the Murphy Renegade Line. 
             
              
               | specifications 
 
                
                 
                  |  | performance 
                  with 2 crew | performance with 2 crew |  
              
                | powerplant propeller
 length
 height
 wing span
 wing area
 seats
 empty weight
 useful load
 gross weight
 fuel capacity
 range
 | Rotax 582 x
 x
 x
 x
 153.8 
                sq ft
 x
 420-500 
                lb
 450-530 
                lb
 950 
                lb
 14 
                US gal
 237 
                miles
 | Rotax 912 x
 x
 x
 x
 153.8 
                sq ft
 x
 460-520 
                lb
 430-490 
                lb
 950 
                lb
 14 
                US gal
 280 
                miles
 |  
            performance 
            
             
              
                | takeoff distance, 
                ground roll rate of climb
 max speed
 cruise speed
 landing distance, ground roll
 service ceiling
 | 350 
                ft 500 
                fpm
 90 
                mph
 72 
                mph
 350 
                ft
 x
 | 300 
                ft 600 
                fpm
 100 
                mph
 80 
                mph
 350 
                ft
 x
 |  
            limiting and recommended speeds
             
              
                | design manoeuvring speed (Va) never exceed speed (Vne)
 stall, power off (Vsl)
 landing approach speed
 | x 120 
                mph
 x
 x
 | x 120 
                mph
 x
 x
 |  All specifications are based on manufacturer's 
            calculations
 |  |  |